FieldCalc: Framing & Carpentry Pro

Stair Stringer Calculator

Total rise in. Riser count, actual riser height, stringer length, plumb and level angles, total run and stairwell opening out, drawn live and checked against IRC R311.7. Exports to PDF.

In App Store review

Free download. Pro unlock $9.99 once. No subscription. iPhone, iOS 17+.

FieldCalc stair calculator: 15 risers at 7 in, 10 in treads, 14 ft 7 in stringer, meets IRC 2024
8' 9" rise → 15 risers @ 7", 14' 7" stringer

What does the stair screen solve?

Finished-floor to finished-floor rise goes in. Riser count, riser height, stringer length, total run and the stairwell opening come out, checked against IRC 2024 R311.7. When the flooring spec changes and the rise moves by 3/4”, every number updates on the next keystroke.

There’s no Calculate button. Straight runs only in this version.

Inputs

Total Rise (floor to floor) takes a plain number in inches (105) or feet-inches (8' 9"). Tread Depth (inches) starts at 10.

Under Advanced Options:

  • Min Riser / Max Riser (in): default 4 and 7.75. These steer the riser count.
  • Top Floor (in): default 9.25. Feeds the stairwell opening.
  • Bottom Floor (in): default 0.75. Printed on the PDF (it doesn’t change any result).
  • Stairwell Opening (optional): enter the framed opening and the app adds a Headroom row and checks it.

What comes out

The results card lists Riser Count, Actual Riser Height, Tread Depth, Stringer Length, Plumb Angle, Level Angle, Total Run, Headroom (only when you enter an opening) and Stairwell Opening Req’d. A stringer profile draws above it as you type. Long-press any row to copy it.

Above the card: “Meets IRC 2024 Criteria” or “Potential Code Issue,” with each violation listed by section. PDF builds a sheet with inputs, results, the stringer drawing and an “IRC 2024 Compliant” Yes/No line. → Materials sends the stringer length to the Board Feet calculator for pricing.

Worked example: 8’ 9” rise, 10” treads

8’ 9” is 105”. At a 7-3/4” max, the minimum is 14 risers (105 ÷ 7.75 = 13.55, rounded up). The app then tries every higher count that keeps risers at or above the 4” minimum and keeps the one closest to 7”. 15 risers land on exactly 7”, so it picks 15, not 14 (14 would give 7-1/2”).

  • Treads: 15 − 1 = 14. The top floor is the last tread.
  • Total run: 14 × 10” = 140” = 11’ 8”
  • Stringer: √(105² + 140²) = 175” = 14’ 7”
  • Plumb angle: arctan(105 ÷ 140) = 36.870°. Level angle: 90° − 36.870° = 53.130°.
  • Stairwell opening req’d: 140 × (80 + Top Floor) ÷ 105. With Top Floor set to 0, that’s 8’ 10-11/16”, the number in the screenshot. At the 9.25” default it’s 140 × 89.25 ÷ 105 = 9’ 11”.

7” risers and 10” treads clear every check: “Meets IRC 2024 Criteria,” Per IRC 2024 R311.7.

What does the IRC check cover?

Three checks:

  • Riser height from 4” to 7-3/4” (Per IRC 2024 R311.7.5.1)
  • Tread depth of at least 10” (Per IRC 2024 R311.7.5.2)
  • Headroom of at least 80” (Per IRC 2024 R311.7.2), only when you enter a stairwell opening

Width, handrails, guards and nosing aren’t checked. The screen labels the result “Reference only — verify with local code and a licensed professional.” It means it.

Assumptions and limits

  • The pass/fail uses the IRC numbers even if you change Min/Max Riser. A local amendment changes the riser count, not the check. Confirm local limits with your AHJ.
  • Stringer length is the floor-to-floor hypotenuse: bottom of the first riser to the top floor edge. No drop for tread thickness.
  • Plumb and level angles describe that same floor-to-floor line, not a single step. For stringer layout, set the square at riser and tread (7 and 10 here).
  • Headroom and Stairwell Opening Req’d are also measured from that floor-to-floor line, which sits below the nosing line on the lower treads (up to one riser at the bottom). Treat the opening as a starting number and check 6’ 8” at the nosings before you frame the header.

Web calculator or app?

The free stair rise and run calculator gives riser count, riser height, treads, total run and stringer length, and it’s fine for a quick estimate at a desk. The app adds the cut angles, stairwell opening, IRC check, saved recents and the PDF, and it runs offline.

$9.99. Once.

10 calculators free forever. The Pro unlock covers the other 11, PDF export included. No subscription, no account, no ads.

Compare with CM Pro and Chippy →

Every calculator in FieldCalc