FieldCalc: Framing & Carpentry Free

Board Feet Calculator

Pick the nominal size, enter length and quantity, read board feet per piece and for the stack. Free.

In App Store review

Free download. Pro unlock $9.99 once. No subscription. iPhone, iOS 17+.

FieldCalc board feet: forty 2x4x10 is 266.67 board feet
40 pcs 2×4×10' → 266.67 BF

What does Board Feet solve?

Lumber gets priced and quoted in board feet. The cut list you’re holding is in pieces and lengths. This screen converts one line of that list at a time: size, length, count.

It’s built for the lumber yard counter or the tailgate. Thirteen preset sizes, a fraction keypad for length, a stepper for quantity. No typing dimensions you already know.

What goes in?

  • Lumber size: 1×4, 1×6, 1×8, 1×10, 1×12, 2×4, 2×6, 2×8, 2×10, 2×12, 4×4, 4×6, 6×6, or Custom. Defaults to 2×4.
  • Custom size: thickness and width in decimal inches (3.5, not 3½).
  • Length: feet-inch-fraction keypad, down to 1/16″.
  • Quantity: stepper, 1 to 9,999.

What comes out?

  • Per Piece: board feet for one stick, two decimals, with the size badge beside it.
  • Total (n pcs): board feet for the whole stack. Appears once quantity is above 1.

The formula prints under the result: BF = (T × W × L) ÷ 12, nominal dimensions. Long-press either number to copy it. Save stores the calculation; Share sends size, length, per-piece and total as one line of text.

Worked example: 40 pieces of 2×4×10′

  • Per piece: 2 × 4 × 10 ÷ 12 = 6.67 BF
  • Total: 6.6667 × 40 = 266.67 BF

The app multiplies the unrounded per-piece value. Round first and you get 6.67 × 40 = 266.80, which is 0.13 BF off. That doesn’t matter on one stack. It adds up across a long lumber list.

Can other screens send a length here?

Yes. Stairs and Rafters both have a ”→ Materials” button that drops the stringer or rafter length into this screen’s length field. Pick the size, set the quantity, done.

Both of those screens are Pro. Board Feet itself is free and stays free.

What are the limits?

Nominal dimensions only on the presets. A 2×4 counts as 2 × 4, not 1½ × 3½. The screen states it: actual dressed dimensions are smaller. That’s how board feet are normally quoted, but if you need actual volume, use Custom with the dressed size.

No waste factor. Add your overage to the quantity before you read the total.

No price field. This screen stops at board feet. Framing Lumber (Pro) takes a stud price and a plate board price for a single wall.

One size per calculation. Mixed orders mean one run per line. The recents strip at the top keeps each run one tap away, so you can step back through the list.

Web or app?

The board feet calculator on this site uses the same (T × W × L) ÷ 12 formula. Use it at a desk with a spreadsheet open; use the app at the yard, where it works offline and takes fractional lengths on the keypad.

$9.99. Once.

10 calculators free forever. The Pro unlock covers the other 11, PDF export included. No subscription, no account, no ads.

Compare with CM Pro and Chippy →

Every calculator in FieldCalc