FieldCalc: Framing & Carpentry Free + Pro

Area, Volume, Weight & Cost

Area & Volume handles rectangles, circles, triangles, trapezoids, boxes, cylinders, cones and spheres (free). Weight / Volume turns yards of gravel into tons and truck loads, and Cost Per Unit solves whichever of total cost, quantity or unit price you leave blank (Pro).

  • Area & VolumeFree
  • Weight / VolumePro
  • Cost Per UnitPro
In App Store review

Free download. Pro unlock $9.99 once. No subscription. iPhone, iOS 17+.

FieldCalc area calculator: 24 by 16 ft rectangle is 384 square feet
24'×16' → 384 sq ft

Three screens for the take-off math that doesn’t belong to any one trade: how big, how heavy, how much per unit. All three update as you type, keep recent calculations, and share or save the result.

Area & Volume: what shapes does it handle?

Pick Area or Volume, then a shape:

  • Area: Rectangle (length × width), Circle (π × radius²), Triangle (½ × base × height), Trapezoid (½ × (side A + side B) × height)
  • Volume: Box (length × width × height), Cylinder (π × radius² × height), Cone (⅓ × π × radius² × height), Sphere (⁴⁄₃ × π × radius³)

Only the fields that shape needs appear. Every dimension is in decimal feet.

The result card shows the primary number in sq ft or cu ft, plus square or cubic inches, square or cubic yards, and a Dimensions row that echoes your inputs in your chosen unit format. The formula sits under the card, so you can see what was multiplied.

Example: 24’ × 16’

Rectangle, Length 24, Width 16:

  • Area: 24 × 16 = 384.00 sq ft
  • Square inches: 384 × 144 = 55296 sq in
  • Square yards: 384 ÷ 9 = 42.667 sq yd

Limits

The screen says it plainly: results are geometric areas and volumes only, with no waste, over-excavation or compaction allowance. Add your own factor.

Circles, cylinders, cones and spheres take radius, not diameter. Halve the number on your tape. Inches go in as decimal feet, so 6” is 0.5.

Weight / Volume: how many tons is that?

Enter a volume in cu yd or cu ft, then pick a material: Concrete (cured), Concrete (wet), Asphalt, Gravel (dry), Gravel (wet), Crushed stone, Sand (dry), Sand (wet), Topsoil, Clay (dry), Water or Mulch. Custom takes any density in lb/cu ft.

Results: Tons up top, then Weight in lb, Metric tons, Truck loads (10 t tandem), the volume in both cubic feet and cubic yards, and the density used.

Example: 3 cu yd of dry gravel

Gravel (dry) is 105.0 lb/cu ft.

  • 3 cu yd × 27 = 81.00 cu ft
  • 81 × 105 = 8505 lb
  • 8505 ÷ 2000 = 4.25 tons
  • 8505 × 0.000453592 = 3.86 t
  • 4.25 ÷ 10 = 0.43 truck loads

Limits

The densities are common working values, not lab figures. The app’s own disclaimer: wet material can weigh 20% more than the same volume dry, and truck loads assume a 10-ton tandem dump. Confirm your hauler’s legal payload before you book. Running a pour? Get yards from the Concrete calculator first, then bring the number here.

Cost Per Unit: what’s the real unit price?

Pick a unit: linear ft, sq ft, sq yd, cu ft, cu yd, board ft, each or sheet. Then fill in any two of Total cost, Quantity and Unit price. The app solves the third. Tax or markup (optional) takes a percentage.

The solved field shows as the headline. Below it: Quantity, Unit price, Subtotal, a Tax / markup row when you entered one, and Total.

Example: $487.50 for 75 sq ft

Unit sq ft, Total cost 487.50, Quantity 75, Unit price blank:

  • Unit price: $487.50 ÷ 75 = $6.50 / sq ft

That’s the number to compare against the next quote, whatever size the bundles come in.

Limits

  • Enter all three and the app recomputes Total from quantity × unit price, so the arithmetic always agrees.
  • Tax or markup is added on top of the subtotal. If you enter a total and a tax rate, the app treats your total as pre-tax.
  • Delivery, minimum-order charges and unit-of-sale rounding aren’t included. Suppliers sell in whole pieces, bundles and loads.
  • Currency follows your phone’s region. Nothing is hardcoded to dollars.
FieldCalc weight per volume: 3 cubic yards of dry gravel is 4.25 tons
3 cu yd gravel → 4.25 tons
FieldCalc cost per unit: 487.50 dollars for 75 square feet is 6.50 dollars per square foot
$487.50 ÷ 75 sq ft → $6.50/sq ft

$9.99. Once.

10 calculators free forever. The Pro unlock covers the other 11, PDF export included. No subscription, no account, no ads.

Compare with CM Pro and Chippy →

Every calculator in FieldCalc